97色伦午夜国产亚洲精品-欧美大胆老熟妇乱子伦视频-国产精品国产三级国产aⅴ下载-av在线无码专区一区-国产精品久久久久久无毒不卡

Home About us News center Products Innovation Careers
industry news
company news
industry news
media focus
video
SPE Hall of Fame winner is a classic part on a classic car
 
 

By Michael Lauzon
CORRESPONDENT
Published: November 4, 2014 12:30 pm ET
Updated: November 4, 2014 12:38 pm ET


Image By: General Motors Co.
This 1984 Cadillac is a classic in more than styling. The model was the first application for a thermoplastic constant velocity joint.


ABC Group Inc. can celebrate its 40th anniversary with an award for one of its early breakthrough blow molding technologies.

The Toronto company won a Hall of Fame Award distinction from the Society of Plastics Engineers’ automotive division for plastic chassis components made by blow molding thermoplastic elastomer. The parts, debuted on some General Motors Co. vehicles, first emerged from ABC Group laboratories in 1984.

The parts’ name is a mouthful, almost as difficult to pronounce as the parts are to be molded. Constant velocity joint half-shaft drive-axle boot seals protect and lubricate under-chassis components in a very unfriendly environment of grease, salt, freezing water, mud and stones. They began to replace injection molded rubber boots on the bases of performance and cost.

SPE rightly spreads credit to ABC Group’s key partners, DuPont Co. and General Motor Co.’s former Saginaw Steering Gear Division. DuPont supplied Hytrel thermoplastic copolyester elastomer for the application while the GM division supplied the know-how to adapt the blow molding technology to the automaker’s vehicles. The partners’ work began in 1977 with joint development of the first blow-molded TPE rack and pinion steering boot, itself a breakthrough for the time.

The new CVJ boots were “a far more robust CVJ sealing solution that also was lighter, more durable and less costly than the injection-molded rubber boots it replaced,” SPE noted in announcing the award. Early adopters were Buick Riviera, Cadillac Eldorado and the Oldsmobile Toronado sedans. Now, some 85 percent of front-axle CVJ boot seals on light-duty vehicles worldwide use TPE in this application to replace polychloroprene rubber. (DuPont also was a major producer of this type of rubber under the tradename Neoprene.)

SPE’s auto division Hall of Fame awards are based on several criteria. Parts must be made of plastics or composites, they must have 15 years of continuous service in the market and preferably have been widely accepted within the automotive and transportation industries.

“It was a truly bold and revolutionary change to switch from thermoset rubber to thermoplastic elastomer,” stated David Reed, SPE Hall of Fame committee chair and retired GM employee, who also was involved in GM’s approval process. “Saginaw ran every performance test we could come up with on the new material, and with each iteration, the TPE passed with flying colors. It offered us both low-temperature flex to -40° F [40° C] and high-temperature durability to 250° F [121° C].”


Image By: ABC Group
The constant velocity joint boot developed by ABC Group went into production in 1984 and now is used globally.


CVJ boots protect bearings in the constant-velocity joint by keeping out road-borne contaminants. And they keep lubricating grease inside the CVJ as the drive axle rotates and propels the vehicle. These demands were hard on rubber boots and a cause of most drive-axle repairs.

ABC Group and its partners, encouraged by the success of TPE rack and pinion boots, developed specialized equipment to blow mold the CVJ products. DuPont came up with customized TPEs for the application. ABC Group established a compounding operation, Saflex, partly to handle demand for the TPE materials.

The main challenge was to maintain tight tolerances required at the large and small sealing surfaces, plus wall thickness control, ABC said in an email correspondence. It developed a sizing technology for both the large and small diameters. This maintained tight tolerances while helping consistent wall thickness control.

Parison control, material distribution for thinner-walled parts, shot-to-shot consistency and ramp-up were big challenges the partners had to overcome. ABC Group patented process developments allowing tighter tolerances on the sealing surface to prevent leaks, “a big issue with the era’s incumbent technology.”

The limited initial launch saw only 250,000 parts under the cars. In the next year, 1985, ABC Group blow molded 11 million of the boots for GM. Initial tooling savings amounted to $380,000. A boot’s weight at 64 grams was less than half the standard boot. Now TPE boots weighing only 40 grams are in use.

ABC Group still is one of the largest molders for the product.

Its technology reduced scrap compared to processes using thermoset rubber. ABC regrinds flash from the process and blends it with virgin TPE to mold more CVJ boots.

“This product was ABC Group’s first innovation, and it allowed the company to significantly increase its sales and expand beyond the North American market,” noted ABC Group senior vice president Danny Cacciacarro in a news release. “The unique process we developed allowed us to create features on the inside of the part and achieve new levels of dimensional control for sealing surfaces.”

With its technical expertise proven, ABC Group expanded globally. One of its first forays overseas was a joint venture with a Japanese auto parts molder, a real achievement given Japanese firms’ propensity to rely on their own technology and an aversion to partner with North American players. Now ABC Group blow molds boots in Canada, Mexico, Brazil, Spain and China. Rear axles today also use TPE boots.

SPE will hand out the Hall of Fame award in Livonia, Mich., on Nov. 12. The society claims its innovation awards program is the oldest and largest competition of its kind and that dozens of teams participate by submitting nominations. About 700 automotive industry plastics engineers and executives attend the gala.


 
About us
company profile
company culture
version and strategy
company history
certification
patents
contact
News center
company news
industry news
media focus
video
Products
products catalog
technical support
Innovation
create value
production line
QA&QC
new technique info
Copyright:King-Tech China Co.,Ltd
主站蜘蛛池模板: 男人边吃奶边做呻吟免费视频| 日韩新无码精品毛片| 中文字幕亚洲一区二区91| 亚洲精品综合欧美一区二区| 一本久久久综合狠狠躁| 国产明星裸体无码xxxx视频| 久久丫免费无码一区二区| 天干夜啦天干天干国产免费| 无码少妇一区二区性色av| 国产久热精品无码激情| 欧美日韩一区二区三观看| 黄色一区二区在线观看| 国产精品伊人网一区二区三区在线观看 | 无码专区视频精品老司机| 午夜不卡av免费| 丰满人妻大屁股一区二区三区 | 青青草无码精品伊人久久7| 精品人妻无码专区在线无广告视频| 亚洲女人自熨在线视频| 亚洲精品一线二线三线无人区| 国产成人无码aⅴ片在线观看导航| 美腿丝袜亚洲一区二区| 免费视频一区二区三区网站| 5个黑人躁我一个视频| 天天综合亚洲色在线精品| 人妻丰满熟av无码区hd| 岛国4k人妻一区二区三区| 日本少妇浓毛bbwbbwbbw| 欧美亚洲国产精品久久高清| 国产强奷伦奷片| 中文字幕人妻在线中字| 欧美一区二区在线资源| 中文字幕一区亚洲| 国模少妇无码一区二区三区| 伊人婷婷六月狠狠狠去| 九九99热久久精品离线6| 欧美丰满熟妇xxxx性| 一区二区狠狠色丁香久久婷婷| 精品麻豆丝袜高跟鞋av| 亚洲欧洲日韩第一区| 无码专区狠狠躁躁天天躁|